Golden Mask Deep Hunter Pro 5 SE Metal Detector

Deep Hunter Pro 5 SE metal detector for buried metal

The Golden Mask Deep Hunter Pro 5 SE metal detector is a pulse-induction instrument intended for searching for larger buried metal objects. This metal detector combines a search coil with audio and visual feedback; the likely response still depends on target dimensions, mineralisation, coil size and the operator’s technique.

Metal detector automatic ground balance and Smart Tune

The Deep Hunter Pro 5 SE metal detector uses the manufacturer’s automatic ground-exclusion system and Smart Tune control to stabilise operation. When using this metal detector on changing soil, repeat tuning as the manufacturer directs and check suspicious signals from more than one direction before digging.

Metal detector rejection and ferrous indication

The Deep Hunter Pro 5 SE metal detector provides a Reject control that can reduce responses from small unwanted objects and noisy ground. This metal detector also has indicators for ferrous and non-ferrous signals, although the indicators require adequate signal strength and cannot establish the exact composition of a buried item.

Metal detector frame and hand-held coil use

A frame coil can suit broad, open ground while compatible hand-held coils may be more practical in confined areas; verify the exact coil set supplied with this Deep Hunter Pro 5 SE metal detector. The metal detector manual gives different handling guidance for each coil type, including keeping a stable height over the ground.

Metal detector power and field preparation

The manufacturer’s manual describes a 12 V, 2600 mAh rechargeable NiMH pack and up to eight hours of use for the Deep Hunter Pro 5 SE metal detector under stated conditions. Charge this metal detector with the supplied charger, verify the included accessories and practise on known targets before relying on field signals.