RIVER-F SMART Water Detector

1. Fresh-Water Detection Mode

   The fresh-water detection mode is designed to search for possible groundwater layers, springs and well locations. Select this water detector mode when fresh water is the target and record the site conditions alongside the indicated result.

2. Salty-Water Detection Mode

   Salty-water detection has its own selectable mode on this water detector. Separating it from fresh-water detection helps the operator document which water type was selected for a particular survey.

3. Water Detection Depth Measurement

   After a possible source is located, the water detector offers a separate depth-measurement procedure. Treat the displayed water detection depth as an estimate to compare with independent local surveys before planning a well.

1. Long-Range Groundwater Detection

   The water detector lets the operator select a front range suited to the survey area, with settings up to 3,000 meters. Record that water detection setting so later readings can be compared under similar conditions.

2. Water Detection for Fresh and Salty Sources

   Choose the fresh-water or salty-water setting before starting groundwater detection. This water detector uses the selected target type as part of its search configuration, so the chosen mode should be noted in field records.

3. Six Soil-Type Settings

   Soil selection lets the operator configure the water detector for clay, mineral, natural, mixed, sandy or rocky ground. For a useful groundwater detection record, note the chosen soil setting and compare it with the actual site conditions.

4. Continent Selection

   RIVER-F SMART Water Detector includes continent selection in its setup menu. This groundwater detector setting is part of the search configuration and should be recorded with the survey location.

5. Full-Color Touchscreen

   The touchscreen gives access to water detector settings, language, sound, brightness, battery status, clock and temperature. Check these groundwater detection controls before collecting and comparing field readings.

6. Water Detection Result Analysis

   The water detector result screen can show target confirmation, environmental noise information and estimated depth. Interpret groundwater detection indications alongside ground conditions and independent checks rather than as a confirmed drilling location.

RIVER-F SMART Water Detector offers Arabic, English, German, French, Spanish and Portuguese interface options. A familiar language can help the operator follow the groundwater detection workflow and record settings consistently.

• Select the water type
  Choose fresh water or salty water before starting the search.
• Select the soil type
  Configure the search for clay, mineral, natural, mixed, sandy or rocky ground.
• Set the search range
  Select the front range according to the expected size of the search area.
• Maintain device balance
  Keep the device balanced while searching and follow the on-screen balance indicator.
• Confirm from four directions
  Confirm the target from north, south, east and west before performing the depth measurement.
• Reduce interference
  Keep mobile phones, electronic devices, power sources and other potential interference away from the search area where possible.

• RIVER-F SMART Water Detector main unit
• Device handle
• Super antenna
• Enhancer antennas
• Recipient antenna
• Device charger
• Car charger
• Shock-resistant protective carrying case

What Is the RIVER-F SMART Water Detector Search Depth?

The manufacturer manual states a water detector search depth of up to 500 meters. Actual groundwater detection results may differ with soil, interference and operating conditions, so verify any proposed well site independently.

What Is the Water Detector Search Range?

This water detector provides selectable front-range settings up to 3,000 meters. The groundwater detection range is a manufacturer-stated setting, and field conditions can affect what the operator observes.

Can RIVER-F SMART Water Detector Search for Fresh and Salty Water?

Yes. RIVER-F SMART Water Detector has separate fresh-water and salty-water search modes. Select the appropriate water detection mode before starting a survey and document which target type was used.

Can RIVER-F SMART Water Detector Estimate Water Depth?

Yes. RIVER-F SMART Water Detector includes a depth-measurement procedure after a possible target is located. The groundwater detection depth shown is an estimate and should be checked with other site evidence.

Which Soil Types Can Be Selected?

The water detector offers clay, mineral, natural, mixed, sandy and rocky soil settings. Match the groundwater detection setup to the survey area and record the selected setting for later review.

Which Languages Does It Support?

RIVER-F SMART Water Detector supports Arabic, English, German, French, Spanish and Portuguese. Choose a clear interface language before using the groundwater detection menus in the field.

Is RIVER-F SMART Water Detector Waterproof?

No. The water detector is described as weatherproof, not waterproof. Protect this groundwater detection instrument from immersion and follow the manufacturer’s handling guidance during wet-weather surveys.

What Is the Water Detector Battery Life?

The water detector uses a rechargeable 27 Wh lithium-ion battery with a stated operating time of up to 10 hours. Check its charge before a groundwater detection survey; runtime can vary with use and conditions.

What Warranty Is Provided?

The manufacturer manual states a two-year warranty for the water detector’s main electronic unit, with exclusions for misuse and some accessories. Review the current warranty terms for this groundwater detection product before purchase.