Searching for OKM6000 usually means looking for the OKM eXp 6000, a professional 3D ground scanner produced by German manufacturer OKM. The important point for buyers in 2026 is that the eXp 6000 is a genuine OKM product, but it is no longer part of the manufacturer’s current production lineup.
OKM produced the eXp 6000 in Professional and Professional Plus configurations. The manufacturer currently lists both among previous products and recommends the newer eXp 7000 Professional Plus as the successor.
That makes an OKM6000 purchase different from buying a new current-production detector: model generation, package contents, software, probes, serial number, condition, and warranty support all need to be checked carefully.
OKM 6000: Clarifying the Model Search
The full product name buyers should look for is OKM eXp 6000.
Two main editions are documented:
- OKM eXp 6000 Professional
- OKM eXp 6000 Professional Plus
Both use the eXp 6000 platform, but their supplied sensors, software editions, and available operating modes differ. OKM’s official comparison shows that the Professional Plus package adds the Live-Stream Sensor, Tunnel Sensor, GPS receiver, and Professional Edition of Visualizer 3D software.
Therefore, a listing described only as “OKM6000” is incomplete. Buyers should identify the exact edition before comparing price or capability.
Is OKM6000 an Official Model?
Yes—with an important naming distinction.
“OKM6000” is a shortened search phrase rather than the complete product designation, but OKM eXp 6000 is an official OKM scanner.
OKM currently labels the eXp 6000 Professional and Professional Plus as previous products. The manufacturer’s product page explicitly states that the eXp 6000 is no longer manufactured and recommends the eXp 7000 Professional Plus as its successor.
This means buyers may encounter:
- Remaining dealer inventory
- Previously owned systems
- Different eXp 6000 generations
- Professional packages
- Professional Plus packages
Do not assume that every OKM6000 listing includes the same hardware.
What Type of Detector Is the OKM eXp 6000?
The eXp 6000 is primarily a professional 3D ground scanner and underground imaging system, not simply a conventional coil detector intended for rapid coin recovery.
OKM documents applications including:
- Treasure hunting
- Archaeology
- Natural-gold prospecting
- Cavity detection
- Underground structure investigation
The Professional Plus version supports six documented operating modes:
- 3D Ground Scan
- Magnetometer
- Pinpointer
- Mineral Scan
- Live Scan
- Tunnel Scan
The standard Professional package supports the first four modes, while Live Scan and Tunnel Scan require sensors included with the Professional Plus configuration.
Buyers can compare other systems in this category through OKM metal detectors before choosing an eXp 6000 package.
Specifications to Verify Before Buying
Because the eXp 6000 has different versions and editions, verify the actual equipment rather than relying only on a seller’s title.
| Item | What to Confirm |
|---|---|
| Exact designation | eXp 6000 Professional or Professional Plus |
| Production generation | Earlier or later eXp 6000 version |
| Control unit | Original unit and functioning touchscreen |
| Main probes | Exact sensors supplied |
| GPS | Included with applicable package |
| Software | Visualizer 3D edition and activation |
| Computer | Included or compatible system available |
| Operating modes | Determined by supplied probes |
| Serial number | Matches genuine equipment |
| Warranty | Remaining manufacturer/dealer coverage |
OKM’s download center also separates the 2021 eXp 6000 from the 2016–2020 version and notes that software updates for the later model are not applicable to the earlier generation.
Professional vs Professional Plus
The package difference can materially affect value.
| Feature | Professional | Professional Plus |
|---|---|---|
| Touchscreen control unit | Yes | Yes |
| Telescopic Rod | Yes | Yes |
| Super Sensor | Yes | Yes |
| GPS receiver | No | Yes |
| Live-Stream Sensor | No | Yes |
| Tunnel Sensor | No | Yes |
| 3D Ground Scan | Yes | Yes |
| Magnetometer | Yes | Yes |
| Mineral Scan | Yes | Yes |
| Pinpointer | Yes | Yes |
| Live Scan | No | Yes |
| Tunnel Scan | No | Yes |
| Visualizer software | Standard | Professional |
These differences are documented by OKM and explain why two apparently similar OKM6000 listings may represent substantially different packages.
OKM6000 Detection Depth: Read the Claim Correctly
OKM’s official eXp 6000 pages state that customers have reported objects detected down to 25 meters (82 feet) using the technology.
That should not be interpreted as a guaranteed detection depth for every target.
Actual results depend on factors such as:
- Target dimensions
- Target material
- Burial orientation
- Soil conditions
- Mineralization
- Scan quality
- Probe selection
- Operator technique
- Data interpretation
A large underground cavity or structure is fundamentally different from a small coin. Buyers should therefore avoid comparing a 3D ground scanner with a conventional detector using one maximum depth number.
Ground Scanner vs Conventional Metal Detector
The correct choice depends on the search objective.
| Requirement | eXp 6000 Ground Scanner | Conventional Detector |
|---|---|---|
| Underground 3D visualization | Yes | Usually no |
| Cavity investigation | Supported application | Usually unsuitable |
| Large buried structures | Relevant application | Model dependent |
| Fast coin hunting | Not primary purpose | Strong application |
| Target audio while sweeping | Secondary workflow | Primary workflow |
| Detailed scan analysis | Major feature | Usually limited |
| Training requirement | Higher | Usually lower |
If coins, jewelry, relics, or routine surface metal detecting are the priority, compare alternatives through the metal detector store rather than purchasing an eXp 6000 only because of its advertised scanning capability.
OKM6000 Price and Value in 2026
Because OKM no longer manufactures the eXp 6000, there is no current standard manufacturer retail price that should be presented as the universal OKM6000 price.
The value of an available unit depends heavily on:
- Professional vs Professional Plus
- Production generation
- Number of sensors
- Software license
- Computer inclusion
- Battery condition
- Physical condition
- Service history
- Remaining support
- Seller credibility
A low price may be poor value if important probes or software are missing.
Current Alternative: OKM eXp 7000 Professional Plus
For buyers seeking a new current-production successor, OKM recommends the eXp 7000 Professional Plus.
The eXp 7000 adds a broader technology set, including VLF functionality, and provides eight operating modes. OKM currently lists it at €29,990 before VAT, shipping, and fees.
The current system supports:
- 3D Ground Scan
- 3D VLF Scan
- Mineral Scan
- Tunnel Scan
- Live Scan
- Magnetometer
- Pinpointer
- VLF Metal Detection
This does not automatically make every eXp 6000 a poor purchase. A complete, authentic, well-maintained eXp 6000 may still suit a buyer whose requirements match its capabilities.
Buyer Checklist Before Ordering
Before purchasing an OKM6000, confirm:
- Exact eXp 6000 edition
- Production generation
- Serial number
- Authenticity
- Complete sensor package
- Control-unit condition
- Battery condition
- Charger
- Protective case
- Visualizer 3D software
- Software activation
- Compatible computer
- Available updates
- Warranty status
- Repair options
- Seller return policy
Also check local rules before scanning or excavating. Metal detecting, archaeological exploration, excavation, and access requirements vary by country, property type, protected-site status, and landowner. Obtain permission and verify applicable local regulations before fieldwork.
Frequently Asked Questions
Is OKM6000 a real OKM detector?
Yes. The correct official product family is the OKM eXp 6000, available in Professional and Professional Plus editions.
Is the OKM eXp 6000 still manufactured?
No. OKM currently lists it as a previous product and recommends the eXp 7000 Professional Plus as its successor.
How deep can the OKM6000 detect?
OKM states that customers have found objects down to 25 meters with the technology. This is not a universal guaranteed depth; target size, soil, scanning conditions, and other factors affect results.
What is the difference between eXp 6000 Professional and Professional Plus?
Professional Plus adds GPS, Live-Stream and Tunnel sensors, Live Scan, Tunnel Scan, and the Professional edition of Visualizer 3D software.
Can the eXp 6000 detect cavities?
Yes. OKM lists cavities, tunnels, tombs, and other underground structures among its intended detectable objects and applications.
Should I buy a used OKM eXp 6000 in 2026?
It can still be considered if the system is authentic, complete, functional, appropriately priced, and supported. Verify the sensors, software, serial number, battery condition, generation, and repair options before payment.
The OKM6000, correctly identified as the OKM eXp 6000, remains a significant professional ground-scanning platform, but buying one in 2026 requires more verification than buying a current model. Confirm the exact edition, generation, probes, software, authenticity, support, and condition, then compare the total package with current OKM alternatives before making the final decision.
